A pair of sandwich-style J-cups with protective bar and rack contact surfaces.
Protective material sits between the steel side plates to help reduce metal-to-metal bar contact. Additional protection covers the front lip and the surfaces that meet the rack.
A pair of rack-mounted spotter arms with protective top pads.
Use on compatible power racks for bench presses, squats and other lifts. The mounting design allows the arms to be repositioned for the exercise setup.
Features
Reinforced support design
Protective top pads
Multiple side holes for additional mounting options
A rack-mounted dip attachment with angled, knurled handles.
The detachable, angled handles provide different grip-width positions for dips and other supported bodyweight exercises. The attachment mounts to a single compatible rack upright.
Features
Long knurled handles with an angled grip layout
Detachable handles
Pin-mounted installation and removal
Single-upright mounting
Compatibility
Upright size
75 × 75 mm and 3 × 3 in
Hole diameter
1 in
Material
Steel body; metal handles
Finish / colour
Black finish with STYL logo plates
What's included
One complete dip assembly:
Two handles
Mounting body
Mounting pin
An open rack shelf with raised rails for gym equipment storage.
Mount between compatible rack uprights, either individually or alongside shelves at other heights. Check the shelf dimensions against the equipment you intend to store.
Features
Open storage design
Raised front and rear rails
Mounts between rack uprights
Compatibility
Compatibility limitations
Confirm rack dimensions and mounting fit before ordering. A 3 × 3 in upright size alone does not establish compatibility.
A rubber-lined flat shelf for rack-mounted gym storage.
Mount between compatible rack uprights, either individually or alongside shelves at other heights. The flat surface and raised rear edge provide a defined storage area; check the dimensions against your equipment.
Features
Rubber-lined storage surface
Surface lining helps protect the shelf and stored equipment
Raised rear edge
Mounts between rack uprights
Compatibility
Compatibility limitations
Confirm rack dimensions and mounting fit before ordering. A 3 × 3 in upright size alone does not establish compatibility.
An Olympic plate storage peg with a two-hole mounting plate and 11 in of usable storage length.
Keep Olympic weight plates organized on a compatible rack. The two-hole mounting plate supports an 11 in storage sleeve with a rounded end. Confirm mounting-hole dimensions and spacing before installation.
Features
Two-hole mounting plate
11 in usable plate storage length
Rounded sleeve end
Use
Storage for Olympic weight plates on compatible racks.
Compatibility
Upright size
3 × 3 in
Compatibility limitations
Confirm mounting-hole dimensions, spacing and installation clearance before ordering.
Usable storage length
11 in — Owner-confirmed usable plate storage length; not overall length.
A rack crossmember with an open channel for small accessory storage.
Mounts between two compatible rack uprights. Use the open channel to organize cable handles, carabiners, magnetic pins, collars and other small accessories within reach.
Features
Open-top storage channel
Holes along both sides for storage and attachment options
Keeps small attachments off the floor
Compatibility
Upright size
3 × 3 in
Compatibility limitations
For compatible racks. Confirm rack dimensions and mounting-hole specifications before ordering.
Dimensions
Length: 1050 mm / approximately 41 5/16 in
Material
Steel
Finish / colour
Black powder-coated finish
What's included
One open-top storage crossmember
Mounting hardware, including bolts
Accessories shown in photographs are not included.
A pair of rigid rack safety supports for compatible racks with a 30 in depth.
Use these rigid safety supports for squats, bench presses and other barbell training on a compatible rack. Adjust the mounting height to suit the exercise setup. A protective contact surface helps reduce metal-to-metal barbell contact.
Features
Rigid metal supports
Adjustable mounting height
Protective bar contact surface
Installation and removal at rack mounting points
Compatibility
Upright size
3 × 3 in
Hole diameter
1 in
Compatibility limitations
For compatible racks with a 30 in depth. Confirm rack dimensions and fit before ordering.
An Olympic plate storage peg with a single-bolt mounting design and 11 in of usable storage length.
Keep Olympic weight plates organized with an 11 in storage sleeve. The single-bolt mounting design allows installation on compatible rack bases, crossmembers or uprights. Confirm mounting dimensions and clearance before installation.
Features
Single-bolt mounting design
11 in usable plate storage length
Mounts on compatible bases, crossmembers or uprights
Use
Storage for Olympic weight plates on compatible rack bases, crossmembers or uprights.
Compatibility
Upright size
3 × 3 in
Compatibility limitations
Confirm mounting-hole dimensions, attachment clearance and suitability of the mounting location before ordering.
Usable storage length
11 in — Owner-confirmed usable plate storage length; not overall length.
A two-pin selector set with aluminum handles and coiled safety tethers.
Replacement selector pins for compatible cable machines, functional trainers and other selectorized equipment. Choose any two currently available colours for your set. Check the selector-hole size and required shaft length before ordering.
Features
Coiled safety tethers help prevent loss
Easy-grip aluminum handles
Compatibility
Compatibility limitations
Confirm the machine selector-hole size and required shaft length before ordering.
Dimensions
10 mm pin diameter; 8 in shaft length, excluding handle
Material
Aluminum handles
Finish / colour
Choose any two currently available colours. Ask about current colour availability.
A double-ended swivel connector for cable-machine handles and bars.
Change attachments using quick-release hooks at both ends. The swivel allows rotation between the cable connection and the attachment to help reduce twisting.
A rack-mounted landmine attachment for Olympic-barbell training.
Mount to a compatible upright or crossmember for landmine rows, presses, rotations and squats. The rack-mounted design keeps the pivot integrated with the rack.
Features
Dual-pivot design for movement in multiple directions
Fits Olympic barbells
Compact rack mounting
Repositionable mounting
Compatibility
Upright size
3 × 3 in
Hole diameter
1 in
Compatibility limitations
For compatible racks. Mounts to an upright or crossmember; accepts Olympic barbells.
Material
Steel
What's included
One complete landmine attachment
Rack mounting hardware
Barbell not included
An Olympic plate storage peg with a pin-on rack bracket and 11 in of usable storage length.
Keep Olympic weight plates organized on a compatible rack. This peg combines an 11 in storage sleeve, a wraparound mounting bracket and a mounting pin. Confirm upright dimensions, mounting-hole size and bracket clearance before installation.
Features
Pin-on mounting design
Wraparound rack bracket
11 in usable plate storage length
Rounded sleeve end
Use
Storage for Olympic weight plates on compatible racks.
Compatibility
Compatibility limitations
Confirm upright dimensions, mounting-hole size and bracket clearance before ordering.
Usable storage length
11 in — Owner-confirmed usable plate storage length; not overall length.
An 8 mm thick 304 stainless steel connector plate for combining two cable attachment points into a single connection point.
Connect two compatible cable attachment points to a single cable attachment with this 304 stainless steel connector plate. The 8 mm thick five-hole plate provides multiple connection positions for different cable setups and attachments. Overall width: 190 mm.
Features
304 stainless steel
8 mm plate thickness
Five connection holes
190 mm overall width
Double-to-single cable connection
Use
For combining two compatible cable attachment points into a single connection point for cable machine attachments.
Compatibility
Compatibility limitations
Confirm cable attachment configuration, connector dimensions and required clearance before ordering.
An M24 × 110 mm Class 8.8 steel bolt set with a zinc-plated finish for compatible power rack connections.
Replacement or additional mounting hardware for compatible power rack connections. This M24 × 110 mm Class 8.8 steel bolt set has a zinc-plated finish and includes one bolt, one hex nut, one flat washer and one spring lock washer. Confirm the required bolt size and rack connection dimensions before ordering.
Features
M24 × 110 mm
Class 8.8
Steel construction
Zinc-plated finish
Complete bolt, nut and washer set
Use
Replacement or additional M24 mounting hardware for compatible power rack connections.
Compatibility
Compatibility limitations
Confirm M24 bolt size, required bolt length and rack connection dimensions before ordering.
Sizes
M24 × 110 mm
Finish
Zinc-plated
Product material
Steel
Included component
bolt × 1
Included component
hex nut × 1
Included component
flat washer × 1
Included component
spring lock washer × 1
Dimensions
M24 × 110 mm
Original listing details
Reviewed values above take precedence.
Original listing material
Steel
Original listing options
Zinc-plated finish
Original listing contents
1 bolt, 1 hex nut, 1 flat washer and 1 spring lock washer
A compact rack-mounted utility hook for hanging small gym accessories from compatible upright or crossmember holes.
Keep frequently used gym accessories within easy reach with this compact rack utility hook. It installs through a compatible hole on a rack upright or crossmember and provides a convenient hanging point for small accessories such as cable attachments, resistance bands, collars and straps. Confirm rack hole and tubing dimensions before ordering.
Features
Rack-mounted utility hook
Installs on compatible upright or crossmember holes
Compact accessory storage
Suitable for hanging small gym accessories
Tool-free placement
Use
For hanging small gym accessories from compatible power rack upright or crossmember holes.
Compatibility
Compatibility limitations
Confirm rack hole and tubing dimensions before ordering.
Premium roller J-Cups with 304 stainless steel construction and aluminum alloy rollers, designed for compatible 3 × 3 in rack uprights with 1 in holes.
Built with 304 stainless steel main structures and aluminum alloy rollers, these Roller J-Cups provide a premium barbell support and positioning solution for compatible power racks. The roller design allows easier side-to-side barbell positioning while the protective contact surfaces help separate the barbell and rack from direct metal contact. Designed for compatible 3 × 3 in uprights with 1 in holes. Sold as a pair. Confirm rack dimensions before ordering.
Features
304 stainless steel construction
Aluminum alloy rollers
Roller design for easier barbell positioning
For compatible 3 × 3 in uprights
For 1 in rack holes
Protective contact surfaces
Sold as a pair
Use
Roller J-Cups for supporting and positioning a barbell on compatible 3 × 3 in power rack uprights with 1 in holes.
Compatibility
Compatibility limitations
Designed for compatible 3 × 3 in rack uprights with 1 in holes. Confirm rack dimensions and attachment clearance before ordering.
Main structure material
304 stainless steel
Roller material
Aluminum alloy
Rack mount interface (requires)
Upright size: listed as 3 × 3 in
Hole diameter: listed as 1 in
Designed for compatible 3 × 3 in rack uprights with 1 in holes. Confirm rack dimensions and attachment clearance before ordering.
304 stainless steel spotter arms with protective upper contact surfaces, designed for compatible 3 × 3 in power rack uprights with 1 in holes.
Built from 304 stainless steel, these Spotter Arms provide adjustable safety positions for compatible power racks. Numbered positions along the arms provide convenient visual references, while the protective upper contact surfaces help separate the barbell from direct metal contact. Designed for compatible 3 × 3 in rack uprights with 1 in holes. Sold as a pair. Confirm rack dimensions and attachment clearance before ordering.
Features
304 stainless steel construction
Numbered adjustment positions
Protective upper contact surfaces
For compatible 3 × 3 in uprights
For 1 in rack holes
Sold as a pair
Use
Adjustable safety spotter arms for compatible 3 × 3 in power rack uprights with 1 in holes.
Compatibility
Compatibility limitations
Designed for compatible 3 × 3 in rack uprights with 1 in holes. Confirm rack dimensions and attachment clearance before ordering.
Finish
Brushed stainless steel with black protective surfaces
Main structure material
304 stainless steel
Rack mount interface (requires)
Upright size: listed as 3 × 3 in
Hole diameter: listed as 1 in
Designed for compatible 3 × 3 in rack uprights with 1 in holes. Confirm rack dimensions and attachment clearance before ordering.
Included component
spotter arms × 2
Material
304 stainless steel
Original listing details
Reviewed values above take precedence.
Original listing options
Brushed stainless steel with black protective surfaces
A crossmember-mounted 3-bar vertical barbell hanger with a carbon steel structure, nylon protective contact plates and included M24 mounting hardware.
Store up to three barbells vertically on a compatible power rack crossmember. The carbon steel hanger features nylon protective contact plates to help separate the barbells from direct steel contact. It mounts directly to a compatible crossmember using two M24 bolts, with the required mounting hardware included. Confirm crossmember dimensions and mounting-hole compatibility before ordering.
Features
3-bar vertical storage
Crossmember-mounted design
Carbon steel construction
Nylon protective contact plates
Two-bolt M24 mounting
Mounting hardware included
Use
Rack-mounted vertical storage for up to three barbells on a compatible power rack crossmember.
Compatibility
Compatibility limitations
Confirm crossmember dimensions, mounting-hole size, mounting-hole spacing and installation clearance before ordering.
Main structure material
Carbon steel
Protective contact plates material
Nylon
Rack mount interface (requires)
Power rack crossmember mounting using 2 × M24 bolts. Confirm crossmember dimensions, mounting-hole size, mounting-hole spacing and installation clearance before ordering.
Included component
3-bar vertical barbell hanger × 1
Included component
Complete M24 mounting hardware (quantity not specified)
Material
Carbon steel with nylon protective contact plates
Original listing details
Reviewed values above take precedence.
Original listing contents
One 3-bar vertical barbell hanger with complete M24 mounting hardware
Rack-mounted dual-roller thigh hold-down attachment for seated lat pulldowns. Fits compatible 3 × 3-inch and 75 × 75 mm uprights with 1-inch holes. Features a 25 mm mounting pin and adjustable support angle.
The Lat Pulldown Thigh Hold-Down Attachment helps keep the thighs positioned during seated lat pulldown exercises.
It mounts to a compatible power rack upright and features two padded rollers for thigh support.
The support bracket angle can be adjusted using the integrated adjustment knob.
Features:
- Dual padded thigh-support rollers
- Compatible with suitable 3 × 3-inch and 75 × 75 mm uprights
- Designed for 1-inch mounting holes
- 25 mm mounting pin
- Adjustable support bracket angle
- Removable rack-mounted design
Compatibility:
Designed for compatible 3 × 3-inch and 75 × 75 mm rack uprights with 1-inch holes. Confirm bracket clearance and mounting fit before purchase.
What's Included:
One complete dual-roller thigh hold-down attachment.
Power rack, bench and cable system are not included.
Features
Dual padded thigh-support rollers
Compatible with suitable 3 × 3-inch and 75 × 75 mm uprights
Designed for 1-inch mounting holes
25 mm mounting pin
Adjustable support bracket angle
Removable rack-mounted design
Compatibility
Upright size
3 × 3 inches / 75 × 75 mm
Hole diameter
1 inch
Compatibility limitations
Confirm bracket clearance and mounting fit. Do not claim universal compatibility.
Material
Metal support frame; padded cylindrical thigh rollers
Finish / colour
Black
What's included
One complete dual-roller thigh hold-down attachment.
Power rack, bench and cable system are not included.
Rack-mounted low row footplate with a textured steel surface and adjustable distance from the upright. Designed for compatible 3x3" and 75x75mm racks with 1" holes.
The STYL Rack-Mounted Low Row Footplate Attachment provides foot support during seated cable rows.
Features:
- Textured steel footplate for improved grip
- Fits compatible 3x3" and 75x75mm uprights
- Designed for 1" upright holes
- 25mm mounting pin
- Adjustable distance from the rack upright
- Black finish
The adjustment knob changes the footplate distance, not its angle.
Check rack dimensions, hole diameter, and mounting clearance before purchasing.
Features
Textured steel footplate for improved grip
Fits compatible 3x3" and 75x75mm uprights
Designed for 1" upright holes
25mm mounting pin
Adjustable distance from the rack upright
Black finish
Use
Foot support during seated cable rows.
Compatibility
Upright size
75 × 75 mm / 3 × 3 inches
Hole diameter
1 inch
Compatibility limitations
Check rack dimensions, hole diameter, and mounting clearance before purchasing.
Finish / colour
Black
What's included
One complete rack-mounted low row footplate attachment.
A 620mm straight cable attachment bar featuring oversized 45mm knurled grips, hollow aluminum alloy construction, and a 360-degree swiveling central eyelet.
The STYL 45mm Thick-Grip Straight Lat Pulldown Bar features oversized 45mm knurled grips, hollow aluminum alloy tubing, and a 360-degree swiveling central attachment eyelet. Overall length: 620 mm (24.4 in). Silver finish. One bar included per product.
Features
Oversized 45mm diameter knurled grips
Hollow aluminum alloy construction
360-degree swiveling central attachment eyelet
For compatible cable machines with a suitable carabiner
One bar included per product
Use
For compatible cable machines with a suitable carabiner.
Compatibility
Compatibility limitations
For compatible cable machines with a suitable carabiner.
Dimensions
Overall length: 620 mm (24.4 in); grip diameter: 45 mm (1.77 in)
A 620mm angled cable attachment bar featuring oversized 45mm knurled grips, hollow aluminum alloy construction, and a 360-degree swiveling central eyelet.
The STYL 45mm Thick-Grip Angled Lat Pulldown Bar features an angled design with oversized 45mm diameter knurled grips.
Its hollow aluminum alloy construction combines a substantial grip diameter with a lightweight design.
The central attachment eyelet swivels 360 degrees for flexible cable positioning.
Designed for use with compatible cable machines using a suitable carabiner connection.
Features
Angled grip design
Oversized 45mm knurled grips
620mm overall length
Hollow aluminum alloy construction
360-degree swiveling central eyelet
Silver finish
Compatibility
Compatibility limitations
For compatible cable machines with a suitable carabiner connection.
Dimensions
Overall length: 620 mm (24.4 in); grip diameter: 45 mm (1.77 in)